FAQs

Yes. Geringhoff corn heads can be adapted to all makes and models of combines.

The corn head is powered by the PTO shaft off the combine to a gearbox. Eliminating the chain and oil bath system used on other corn heads, larger heads are driven from both sides. This design also provides a superior transmission of power, increases product life and reduces maintenance time

Geringhoff subjects all it's products to rigorous and documented testing. The ROTA DISC has been tested in irrigated, high yield, high population conditions. We have determined that the ROTA DISC will require up to 3HP more per row than a conventional corn head. The NORTHSTAR model does not require any additional HP rating than a conventional corn head. Many NORTHSTAR users have reported a lower horsepower draw than their previous OEM heads.

All Geringhoff corn header frames are black. Poly snouts (or bonnets) are matched to the color of your combine. The bonnets can easily be change if you change brands of combines. Current color availability is; green, red, yellow or grey.

Yes. Simply remove the current mounting brackets and replace them with brackets designed for your new combine. The mounting brackets are very affordable and readily available.

Geringhoff headers are well known for their durability however we're also very proud of our reputation for after sales support. Our dealer network is provided with rigorous training and have a good parts selection. Geringhoff also offers full time, dedicated field service and support staff to assist you throughout the year. We employ a sales team throughout the US and Canadian corn belt to ensure your complete satisfaction. Geringhoff was established in 1880 and produced it's first corn head in the 1960's. The US distribution team has been working with dealers and growers for over 30 years. We are committed to your ongoing satisfaction.

Geringhoff products are recognized around the world as being the highest quality cornheads available. The upfront investment in a Geringhoff header is greater than conventional head. The long term cost of ownership however is recognized as one of the lowest when one considers that a Geringhoff head will provide: the highest resale value, exceptional durability and tremendous yield improvements given minimal cob loss. In addition, growers who choose the Rota Disc model will avoid the expense of an additional stalk chopping pass, saving over $10 per acre. Your local Geringhoff dealer will provide an exact quote for you. A competitive lease program is also offered.

Geringhoff produces folding headers in both the Rota Disc and NorthStar models from 4 row up to 24 Row.

No. The stalk shredding feature is only available on the Rota Disc and although Rota Disc row units can be replaced, it would be cost prohibitive to convert an NorthStar header with complete new row units and the Rota Disc drive system

Geringhoff produces two types of corn heads. The Rota Disc is for growers who want to harvest corn and destroy stalks in a single pass. The NorthStar provides the technological advances of the Geringhoff corn header, and relies upon an advanced knife roll design. The knife rolls do not destroy the stalk to the same degree as the Rota Disc, however it will provide greater destruction than any OEM knife roll head currently available.

There are several benefits to using the ROTA DISc Corn head. In most areas, by cutting the stalks at the same time as picking your corn, it will save the additional pass that many growers must make to chop or dispose of the stalk. In addition it will decrease the cost of your primary tillage and secondary tools as well as improve residue management. Currently, Geringhoff's 16 row header is the largest available. The massive capacity allows the grower to maximize the use of today's highest capacity combines. Geringhoff also offers headers that fold with the push of a button. This allows the grower to safely travel down narrow roadways.

The stalks will be 3-6 inches long, cut at an angle. Much of the inner pulp will be exposed to enhance the decaying process. All stalk stubble will be left in the field at a height above the ground which is determined by the operator.

Yes. The quality of the cut is equal or superior. A primary advantage of the ROTA DISC system is that all of the stalks are chopped before the wheels of the combine, grain wagon, tractor or truck have an opportunity to run over them

No. The ROTA DISC is a complete corn head of the highest quality. It is engineered and manufactured to exceptional levels of performance, durability and reliability